Top 10 Sponge Holder for Kitchen Sink Magnet – Utility Racks

As an Amazon Associate I earn from qualifying purchases.

1. Smart&Cool

#ad

SMART&COOL Magnetic Sponge Holder for Case Iron Kitchen Sink, 5.1'', 2 Pack

#ad
Smart&Cool #ad - Attention: this holder is specially designed for case iron kitchen sink. Size: 5. 12 inches with 2 magnets design holds more stuff. Material: 1 magnets: neodymium magnet coated with silicone; 2 Holders: stainless steel. Warranty: this sponge holder has a 1 year replacement guarantee. One package contains: 2 sponge holders, 2 back side steel strips self-adhesive, 4 magnets.
BrandSmart&Cool #ad
ManufacturerSMART&COOL #ad

2. NEXCURIO

#ad

Quick Drying 2 Pack, NEXCURIO Adhesive Sponge Holder Sink Caddy for Kitchen Accessories, SUS304 Stainless Steel Rust Proof Waterproof

#ad
NEXCURIO #ad - It is important to keep the sink dry and clean before sticking. Easy to install, no drilling: just peel off the protective layer and stick it on the desired position.

Using it in kitchen, bathroom and anywhere you want. Rustproof and Waterproof. Size: 1. 97 x 1. 97 x 1. 18 inch. Powerful adhesive can hold 8 lbs in daily use, more durable and stronger than suction cup. Small design but multi-functional. Sink sponge holder are made of sus304 stainless steel with brushed finish. Not just as an sponge caddy for kitchen Sink, but also can be an Sink Organizer for sink strainer. Special sponge holder for sink: Open design allows water to drain, sponge dry quickly in sink without leaving outside messes. Dish sponge holder will not take much space when you are washing dishes or vegetables.
BrandNEXCURIO #ad
ManufacturerNEXCURIO #ad
Height1.97 Inches
Length1.97 Inches
Weight0.19 Pounds
Width1.18 Inches
Part NumberNXCR-ASH
ModelNEXR-ASH

3. OXO

#ad

13273500 OXO Good Grips StrongHold Suction Sponge Holder,Gray,One size, OXO

#ad
OXO #ad - Phthalate-free strong hold suction cup activates with a push of a lever. Not recommended for use with textured or porous surfaces including some stone, acrylic or metal. Removable holder comes off suction base to make more room inside your kitchen sink while washing large items. For best results, use in stainless steel sinks. Drainage slots allow for quick drying. Dishwasher safe.
BrandOXO #ad
ManufacturerOXO #ad
Height7 Inches
Length1.8 Inches
Weight0.2 Pounds
Width4 Inches
Part Number13273500
Model13273500

4. LucyPhy

#ad

LucyPhy Magnetic Sponge Holder for Kitchen Sink Caddy Stainless Steel No Drilling with Adhesives Waterproof Quick Drying Kitchen Accessories

#ad
LucyPhy #ad - It is very convenient to use, no screw accessories are needed, no adhesive stickers, no suckers, not need punching holes, just put the holder directly on the metal surface.

Hang it directly on the holder after using the sponge brush to avoid the trouble of water accumulation caused by putting it on the sink surface. Easy to install. It doesn't need to occupy the space of the sink candy countertop, and it can be used directly by hanging on the inside of the sink candy. Save place. It won't break or rust. No stickers, no worries about dropping. It's only fit for stainless steel sink caddy, not fit for quartz or marble sink. Sus 304 stainless stell. Package included 1 x LucyPhy magnetic sponge holder. Magnetic sponge holder.
BrandLucyPhy #ad

5. ESINAM

#ad

Minimal Size, 2Pcs ESINAM Sponge Holders for Kitchen Sink, Strong Adhesive Small Sponge Holder, Premium Rustproof & Waterproof Kitchen Sink Caddy, SUS304 Stainless Steel

#ad
ESINAM #ad - Open design make sponge dry quickly and keep sink being clean. Waterproof & rustproofour kitchen sponge holder can be used in your kitchen sink or bathroom these wet place, you don’t need to worry about it getting rust or falling off.

Install in one minuteyou only need to peel the adhesive tape off, stick on the clean and dry wall and use the sink sponge holder 24 hours later for better adhesion. Save storage spaceminimal design helps you save more storage space of kitchen, especially using as an in-sink holder for sponge and sink stopper, makes your kitchen sink look more organized. Better kitchen environment brings better mood to you. Multi-functional sponge holderthe sponge holder can be used to hang dish sponge, sink stopper, small pot lid, dishcloth, spatula, brush, cutting board and so on just as you like.

Refund request is Accepted In Case Of Not Adhesive. More durableour adhesive sponge holder for kitchen sink made of SUS304 stainless steel and strong adhesive tape, more durable and sturdy than suction cup, strong grip allows 8 lbs total weight for using.
BrandESINAM #ad
ManufacturerESINAM #ad
Height1.34 Inches
Length1.97 Inches
Weight2.89 ounces
Width1.97 Inches
Part NumberESINAM-001
ModelESINAM-001

6. STAUBER

#ad

Upgraded! Classic, STAUBER Best Sponge Holder

#ad
STAUBER #ad - Powerful snap-on, snap-off magnetic Mounting System: ensures that our sponge holder stays where you put it! Easily detachable: for when you need more sink space. Don't waste money on other thin, cheap, flimsy sponge holders. Elegant, modern design: never have gross, discolored suction cups in your sink again! Thick, durable construction: our wires are much thicker and stronger.100% stainless steel Components: rust resistant and easy to keep clean.
BrandSTAUBER #ad

7. LEFTSTARER

#ad

4 Pack Sink Sponge Holder for Kitchen Sink Premium SUS304 Stainless Steel Rustproof Waterproof Quick Drying Small Strong Adhesive Sponge Holder 4

#ad
LEFTSTARER #ad - Easy to install: the sponge holder is not magnetic. Dish sponge holder will not take much space when you are washing dishes or vegetables. Please remove it before installation and use. Using it in kitchen, sink stopper, bathroom, brush, spatula, living room and anywhere you want.

Open design: open design allows water to drain, sponges can dry quickly and keep clean without leaving outside messes or food residue. You only need to peel the adhesive tape off, stick on the clean and dry wall and use 24 hours later for better adhesion. It can hold 8 lbs in daily use, more durable and stronger than suction cup.

The surface is protected by blue protective film. High-quality: sink sponge holder is made of sus304 stainless steel, rustproof and waterproof, not magnetic. Save space: 1. 97 x 1. 97 x 1. 34 inch. Multi-function:you can use to hang sponge, caddy, small pot lid, dishcloth, cutting board and so on just as you like. Small and sturdy, save the space of the sink.
BrandLEFTSTARER #ad
Height1.97 Inches
Length1.97 Inches
Width1.34 Inches

8. Hittanous

#ad

Hittanous 2Pcs Sponge Holder for Kitchen Sink Caddy, Strong Adhesion Strength Not Easy Shedding Rust Proof Waterproof Kitchen Sink Sponge Holder SUS304 Stainless Steel Silver

#ad
Hittanous #ad - Sponge holder for kitchen sink -- sponge holder made of sus304 stainless steel. Strong adsorption -- sink sponge holder with strong adhesive. Use your imagination -- take a look at these great home and kitchen storage accessories, dishcloth, can help organize a lot of things, use your creativity to DIY and have fun, not only for sponges, also various kitchen gadgets, spatula, vegetable brushes, sink stoppers, FREE RETURN AND EXCHANGE SERVICE.

Let you shop with confidence. Small size & exquisite appearance -- silver sponge holder metal appearance, low profile and easily hidden, save space, visually pleasing, Compared with other sponge holders, small size does not take up sink space, perfect integration with the sink, make your sink look very neat. Easy to install - clean the wall, keep it dry, stick it where needed, squeeze the air out from the middle to make it fit completely, tear off the protective film behind the sponge holder, wait for 24 hours to use it more firmly.

Compared with other suction cup types and magnetic types, more solid and lasting, can bearable up to 10 lbs total weight, can long-lasting use shows no signs of loosening. Compared with other common metals and ceramics plastics, quick drainage, keeps sponges dry, provide you with a clean and tidy kitchen environment, never rust, stay in a good mood.
BrandHittanous #ad
ManufacturerHoumyud #ad

9. Smart&Cool

#ad

Contains 4 Outside Magnets for Thin Stainless Steel Sink, SMART&COOL Upgraded Magnetic Sponge Holder for Case Iron Kitchen Sink, Stainless Steel, 2 Pack, 5.1''

#ad
Smart&Cool #ad - Warranty: the sponge holders have a 1 year replacement guarantee. Size: 5. 12 inches with 2 magnets design holds more stuff. 2 this holder will not work on thick walled sinks, like stone sinks. The maximum effect range of the magnets is 047''. Please use the provided outside magnets on the back side of your sink. One package contains: 2 sponge holders, 4 magnets for holders and 4 outside magnets self adhesive. Attention: 1 stainless steel sinks are not attracted to magnets. Material: 1 magnets: neodymium magnet completely encased with silicone; 2 Holders: stainless steel.
BrandSmart&Cool #ad
ManufacturerSMART&COOL #ad

10. TureTech

#ad

Silver, TureTech Sponge Holder for Kitchen Sink, Brushed Stainless Steel Sponge Caddy with Adhesive

#ad
TureTech #ad - Made of 304 stainless steel, durable and never rust. Waterproof. It can be used for many years. Powerful adhesive can hold more than 8 lbs. More durable and stronger than suction cup. Thick and durable. Small and sturdy, save the space of the sink, perfect for dish sponges and dishcloths. Open design allows water to drain, sponges can dry quickly and keep clean.
BrandTureTech #ad
ManufacturerTureTech #ad
Height1.32 Inches
Length1.95 Inches
Width1.95 Inches
Part NumberSP-1
ModelSP-1