Walnut Hollow Pendulum Clock Movement for 3/4-inch Surfaces, Large

#ad
Walnut Hollow TQ800P #ad - Includes gold colored hands and pendulum. The ideal replacement parts for your treasured clock. Comes with full assembly instructions. Quartz clock movement needs AA battery which is not included. It is ideal to repair a treasured clock or even to design your own pendulum clock to decorate your home or as a gift.

The minute hand is approximately 2-inches 508mm long, the hour hand is approximately 1. 25-inches 508mm long and the Pendulum is 9. 625-inches 244. 5mm long. Almost anything you can drill a 3/8-inch 9. 5mm diameter hole in, can be turned into a clock if there is room for the pendulum. Design and make your own pendulum clock.

Walnut Hollow Pendulum Clock Movement for 3/4-inch Surfaces, Large #ad - Full assembly instructions are supplied. The most important thing is to select a movement that closely matches the thickness of the piece you are using to make a clock; this one has a shaft length of 3/4-inches 19mm and so will fit a surface up to that thickness. The quart movement requires a AA battery which is not included which also.

This pendulum movement will fit a surface that is up to 3/4-inches 19mm thick.

More information about Walnut Hollow TQ800P #ad

Walnut Hollow Clock Surface, Round

#ad
Walnut Hollow 23026 #ad - Round pine clock surface has a decorative border. Pre-drilled hole. Made in the USA. Uses walnut hollow's 23855 Clock Movement. Made of solid pine. Great for any room. Made in America. Ready to stain, wood carve, Woodburn, attach stickers, paint, or stamp. Large, finely sanded surface. Large 11" diameter.

More information about Walnut Hollow 23026 #ad


Similar products



Walnut Hollow Baltic Birch Clock Face Gallery Round, 14-Inch

#ad
Walnut Hollow 27636 #ad - Baltic birch plywood large round clock surface to hang on a wall. Imported product. Made in America. Made of Baltic birch. Pre-drilled hole. Walnut hollow-uses clock movement for 3/8 thick surface. Uses clock movement for 3/8 thick surface. Made of solid pine. Large, finely sanded surface. Made of Baltic birch. Large 11" diameter.

. Ready to stain, paint, attach stickers, wood burn, or stamp.

More information about Walnut Hollow 27636 #ad


Similar products



LilyGlory Original Youngtown 12888 Pendulum type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length.

#ad
LilyGlory #ad - Battery: one 1. 5v carbon-zinc batteries only, not included. 165 mm 6. 5 inches package included: 1 x quartz clock movement 1 x Second hand 1 x Minute hand 1 x Hour hand 1 X Plastic washer 1 X Brass washer 1 X Brass nut Pre-drilled hole. Features: Easy and simple design. Made in America. Large 11" diameter. Made of solid pine.

Large, finely sanded surface. 56 x 110 x 18 mm 2. 2 x 3. 3 x 07inches Total hour hand length: approx. Imported product. Uses clock movement for 3/8 thick surface. 124 mm 4. 8 inches Total second hand length: approx. Material: plastic and aluminum. Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.

LilyGlory Original Youngtown 12888 Pendulum type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length. #ad - Applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, craft clock, etc. Instructions - Included along with the movements.

More information about LilyGlory #ad


Similar products



Darice DIY Gold Metal Roman Numeral Clock Numbers, 15 Piece

#ad
Darice 30020691 #ad - Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions. Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Instructions - Included along with the movements.

Pendulum type step movement, suitable for 9 - 13 mm 9/25 - 1/2 inches thickness clock panel;total shaft length: 23 mm 9/10 inches, thread length: 15. 4 mm 3/5 inches. Max pendulum swing: 26¡ã;max pendulum Weight: 40g ; Max Pendulum Length: 35cm. This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.

Darice DIY Gold Metal Roman Numeral Clock Numbers, 15 Piece #ad - 15 gold roman Numeral clock numbers. Numbers measure about. 875 inches tall. Large 11" diameter. Imported product. Use glue to add to clock faces. Made in America.

More information about Darice 30020691 #ad


Similar products



Walnut Hollow Arabic Clock Numerals .625", Gold

#ad
Walnut Hollow 122610 #ad - Gold metal Roman Numeral clock numbers. Made in America. This package contains 5/8in black and gold plastic numerals for clock makers. Numbers measure about. 875 inches tall. Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.

Applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc. Instructions - Included along with the movements. Pendulum type step movement, suitable for 9 - 13 mm 9/25 - 1/2 inches thickness clock panel;total shaft length: 23 mm 9/10 inches, thread length: 15. 4 mm 3/5 inches.

Walnut Hollow Arabic Clock Numerals .625", Gold #ad - Max pendulum swing: 26¡ã;max pendulum Weight: 40g ; Max Pendulum Length: 35cm. This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel. 15 gold roman Numeral clock numbers. Use glue to add to clock faces. Large 11" diameter.

Uses clock movement for 3/8 thick surface. Imported product.

More information about Walnut Hollow 122610 #ad


Similar products



Set of 12 Arabic Numerals

#ad
Klockit 60045 #ad - Walnut hollow-arabic Clock Numerals. Numbers measure a little more than. 0625 inches thick. Large 11" diameter. Use glue to add to clock faces. Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.

Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Instructions - Included along with the movements. Pendulum type step movement, suitable for 9 - 13 mm 9/25 - 1/2 inches thickness clock panel;total shaft length: 23 mm 9/10 inches, thread length: 15. 4 mm 3/5 inches.

Set of 12 Arabic Numerals #ad - Max pendulum swing: 26¡ã;max pendulum Weight: 40g ; Max Pendulum Length: 35cm. This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel. 15 gold roman Numeral clock numbers. Made of solid pine. Made of Baltic birch.

Large, finely sanded surface. 1" high.

More information about Klockit 60045 #ad


Similar products



Klockit Arabic Square Metal Dial

#ad
Klockit 26881 #ad - Imported product. Uses clock movement for 3/8 thick surface. 6 1/16" time Ring. Contemporary Styling. Klockit's assortment of metal dials can be used to provide an elegant focal point to any clock assembly. Large, finely sanded surface. 7 1/4" square. Large 11" diameter. 2 year warranty. Numbers measure a little more than.

0625 inches thick. Set of 12. Made of solid pine. Made in USA. Suggested hand Size: 2 3/4". Use glue to add to clock faces. 1" high. Made of Baltic birch. Pre-drilled hole. Numbers measure about. 875 inches tall. Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.

Klockit Arabic Square Metal Dial #ad - Applicable to cross-stitch, three-dimensional embroidery, frameless draw clock, craft clock, etc. Instructions - Included along with the movements.

More information about Klockit 26881 #ad


Similar products



Quartz Pendulum Clock Movement Kit with 1 Set of Hands Out of 4 Types to Choose From, for Dials up to 1/2" Thick

#ad
Takane #ad - This an accurate dependable American made movement. Movement specifications: shaft Diameter: 5/16" 8mm Motor: Self-Start, 1 second step. Minute hand shaft is 15/16" overall and the threaded shaft is 11/16". Hand specifications: A. Use glue to add to clock faces. Large, finely sanded surface. Suggested hand Size: 2 3/4".

Minute hand-2 1/16" B. Imported product. Numbers measure about. 875 inches tall. Message me which you prefer or I will send default set C hands. Minute hand-4 3/4" G. Made in USA. J. This package contains 5/8in black and gold plastic numerals for clock makers. L. Minute hand-3" E. Made of Baltic birch. Uses clock movement for 3/8 thick surface.

Quartz Pendulum Clock Movement Kit with 1 Set of Hands Out of 4 Types to Choose From, for Dials up to 1/2" Thick #ad - I. Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.

More information about Takane #ad


Similar products



Clock Accessory Short Metal Pendulum 42g 250mm Length DIY Clock Kits 25cm Length

#ad
TIKROUND #ad - Made in USA. 3. Clock parts, prepair original clock, DIY clock. 2. Brass color pendulum. 5. Just hang on the pendulum drvie units. Pre-drilled hole. Numbers measure a little more than. 0625 inches thick. You can also use it to change your original bad clock pendulum, this will save much money because you didn't need to repalce the whole clock.

Large, finely sanded surface. Imported product. Large 11" diameter. Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions. Applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc.

Clock Accessory Short Metal Pendulum 42g 250mm Length DIY Clock Kits 25cm Length #ad - Instructions - Included along with the movements. Pendulum type step movement, suitable for 9 - 13 mm 9/25 - 1/2 inches thickness clock panel;total shaft length: 23 mm 9/10 inches, thread length: 15. 4 mm 3/5 inches. Max pendulum swing: 26¡ã;max pendulum Weight: 40g ; Max Pendulum Length: 35cm. This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.

15 gold roman Numeral clock numbers.

More information about TIKROUND #ad


Similar products



Walnut Hollow Clock Hands, 3-1/2-Inch and 4-1/4-Inch

#ad
Walnut Hollow 1006-G #ad - Contemporary Styling. These hands make it easy to restore all types of clocks. Made of solid pine. Large, finely sanded surface. Set of 12. Message me which you prefer or I will send default set C hands. 1. Metal pendulum 40g 250mm length. Uses clock movement for 3/8 thick surface. 2. Brass color pendulum. 5. Just hang on the pendulum drvie units.

7 1/4" square. Suggested hand Size: 2 3/4". Walnut hollow-arabic Clock Numerals. Good for repairing, replacing or making a clock. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions. Applicable to cross-stitch, craft clock, three-dimensional embroidery, frameless draw clock, etc.

Walnut Hollow Clock Hands, 3-1/2-Inch and 4-1/4-Inch #ad - Instructions - Included along with the movements. Pendulum type step movement, suitable for 9 - 13 mm 9/25 - 1/2 inches thickness clock panel;total shaft length: 23 mm 9/10 inches, thread length: 15. 4 mm 3/5 inches. Max pendulum swing: 26¡ã;max pendulum Weight: 40g ; Max Pendulum Length: 35cm. This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.

More information about Walnut Hollow 1006-G #ad


Similar products